Related Mcqs:

1. What is the shear rate at the pipe wall, in case of laminar flow of Newtonian fluids in a pipe of diameter ‘D’ & length ‘L’ incurring a pressure drop ‘Δp’ with average velocity ‘Vavg’ ?

   A. D Δp/8L
   B. D Δp/4L
   C. 8 Vavg/D
   D. 4 Vavg/D

2. The pressure drop per unit length of pipe incurred by a fluid ‘X’ flowing through pipe is Δp. If another fluid ‘Y’ having both the specific gravity & density just double of that of fluid ‘X’, flows through the same pipe at the same flow rate/average velocity, then the pressure drop in this case will be__________________?

   A. Δp
   B. 2Δp
   C. Δp2
   D. Δp/2

3. The velocity profile exhibited by laminar flow of Newtonian fluids is such that the velocity distribution w.r.t. radius of the circular pipe is a/an ______________ with the apex at the centre line of the pipe?

   A. Hyperbola
   B. Parabola
   C. Semi-circle
   D. Semi-ellipse

4. A Newtonian liquid (ρ = density, μ = viscosity) is flowing with velocity „v‟ in a tube of diameter ‘D’. Let Δp be the pressure drop across the length ‘L’. For a laminar flow, Δp is proportional to_________________?

   A. Lρv2/D
   B. LμV/D2
   C. Dρv2/L
   D. μV/L

5. The ratio of average fluid velocity to the maximum velocity in case of laminar flow of a Newtonian fluid in a circular pipe is_____________________?

   A. 0.5
   B. 1
   C. 2
   D. 0.66

6. For laminar flow of Newtonian fluid in a circular pipe, the velocity distribution is a function of the distance ‘d’ measured from the centre line of the pipe, and it follows a ______________ relationship?

   A. Logarithmic
   B. Parabolic
   C. Hyperbolic
   D. Linear

7. The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of _____________ fluid?

   A. Dilatent
   B. Pseudo-plastic
   C. Bingham plastic
   D. Newtonian

8. The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for ______________ fluid?

   A. Newtonian
   B. Dilatant
   C. Pseudo-plastic

   D. Non-Newtonian

9. The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for ____________ fluid?

   A. Newtonian
   B. Pseudo-plastic
   C. Dilatent
   D. Bingham plastic

10. Bernoulli’s equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli’s equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is steady. C. Fluid flow is uniform & turbulent. D. Fluid is compressible. E. Fluid is incompressible ?

    A. A, C, D
    B. B, D, E
    C. A, B, E
    D. A, D, E