A. 0.5
B. -0.5
C. 1
D. 1.5
Related Mcqs:
- The fractional volume change of the system for the isothermal gas phase reaction, A → 3B, between no conversion and complete conversion is___________________?
A. 0.5
B. 1
C. 2
D. 3 - A liquid phase reaction is to be carried out under isothermal conditions. The reaction rate as a function of conversion has been determined experimentally and is shown in the figure given below. What choice of reactor or combination of reactors will require the minimum overall reactor volume, if a conversion of 0.9 is desired ?
A. CSTR followed by a PFR
B. PFR followed by a CSTR
C. CSTR followed by a PFR followed by a CSTR
D. PFR followed by a CSTR followed by a PFR - In case of the irreversible unimolecular type, first order reaction, the fractional conversion at any time for constant volume system as compared to variable volume system is___________________?
A. More
B. Less
C. Same
D. Either A. or B., depends on other factors - For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is____________________?
A. 2
B. 4
C. 11
D. 22 - The rate of a gas phase reaction is given by K . CA . CB. If the volume of the reaction vessel is reduced to l/4th of its initial volume, then the reaction rate compared to the original rate will be _______________ times?
A. 4
B. 16
C. 8
D. 2 - Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is a function of reaction temperature. In a chemical reaction, the time required to reduce the concentration of reactant from 100 gm moles/litre to 50 gm moles/litre is same as that required to reduce it from 2 gm moles/litre to 1 gm mole/litre in the same volume. Then the order of this reaction is ?
A. 0
B. 1
C. 2
D. 3 - A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is ___________________?
A. 0.33
B. 0.5
C. 1
D. Data insufficient, can’t be predicted - An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP – 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is_________________?
A. 0.80
B. 1.33
C. 1.60
D. 2.67 - The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is _______________________?
A. 2/3
B. 5/8
C. 1/3
D. 3/8 - For a gaseous phase reaction, rate of reaction is equal to K. CA . CB. If the volume of the reactor is suddenly reduced to 1/4th of its initial volume, then the rate of reaction compared to the original rate will be ______________ times?
A. 8
B. 16
C. 1/8
D. 1/16
