A. Low excess air
B. Very high excess air
C. Gaseous fuel in the furnace
D. Liquid fuel in the furnace
Related Mcqs:
- Black smoke coming out of the chimney of a furnace is an indication of the use of ______________ in the furnace?
A. Low amount of excess combustion air
B. Large quantity of excess combustion air
C. Hydrocarbon fuel
D. Pulverised coal as fuel - Sooty and sulphurous smog formed due to combustion of fossil fuels particularly in winter, continues throughout the day and night. When the moist atmospheric air’s water vapor condenses on the solid particles of smoke thereby forming smog (smoke + fog), it causes_________________?
A. Poor visibility due to sky darkening
B. Irritation in eyes
C. Respiratory trouble
D. All A., B. and C. - Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about ____________ decibels?
A. 3
B. 30
C. 7
D. 70 - Sulphur dioxide present in the industrial chimney exhaust gases causes____________________?
A. Respiratory & lung disease
B. Reduction in plant’s productivity owing to acid rain
C. Corrosion of building materials
D. All A., B. and C. - Exposure to SO2 containing chimney gases results in the__________________?
A. Reduction in strength of leather & cloth
B. Acceleration of corrosion rates of metals
C. Increased drying & hardening time of paints
D. All A., B. and C. - Ringelmann chart No. 2 corresponds to _______________ percent black smoke?
A. 10
B. 20
C. 40
D. 80 - Smoke is produced due to__________________?
A. Insufficient supply of combustion air and insufficient time for combustion
B. Poor quality of fuel and improper mixing of fuel & combustion air
C. Poor design & overloading of furnace
D. All A., B. and C. - Disinfection of water is done to destroy pathogenic bacteria and thus prevent water-borne diseases. Disinfection of water may be done by the use of_________________?
A. Ozone and iodine
B. Chlorine or its compounds
C. Ultraviolet light for irradiation of water
D. All A., B. & C. - Which is the most efficient dust removal equipment for removal of submicronic dust particles from blast furnace gas ?
A. Packed scrubber
B. Gravity settling chamber
C. Electrostatic precipitator
D. Hydrocyclone - Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by__________________?
A. Biological oxygen pond
B. Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)
C. Lagoons
D. Filtration