Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the___________________?

Related Mcqs:

1. The friction factor for the turbulent fluid flow in a rough pipe does not depend upon the_________________?

   A. Pipe roughness & pipe diameter
   B. Fluid velocity
   C. Type of flowing fluid
   D. Both B. & C.

2. The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) ?

   A. A
   B. D
   C. 1/A
   D. 1/A2

3. Friction factor for fluid flow in pipe does not depend upon the________________?

   A. Pipe length
   B. Pipe roughness
   C. Fluid density & viscosity
   D. Mass flow rate of fluid

4. Transition from laminar to turbulent zone in free convection heat transfer is governed by the critical value of ?

   A. Grashoff number
   B. Grashoff number & Reynolds number
   C. Reynolds number
   D. Grashoff number & Prandtl number

5. Reynolds number of a fluid flowing in a circular pipe is 10,000. What will be the Reynolds number when the fluid velocity is decreased by 30% & the pipe diameter is increased by 30% ?

   A. 9,100
   B. 13,000
   C. 7,000
   D. 2,550

6. The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be_______________?

   A. Parabolic
   B. Hyperbolic
   C. Straight line
   D. None of these

7. Nusselt number is related to Grashoff number (Gr) in turbulent & laminar flow respectively, in respect of free convection over a vertical flat plate as_________________?

   A. Gr0.25, Gr
   B. Gr0.25, Gr0.33
   C. Gr, Gr0.25
   D. Gr0.33, Gr0.25

8. Nusselt number is related to the Reynolds number (Re) in turbulent & laminar flow respectively as______________________?

   A. Re0.5, Re0.8
   B. Re0.8, Re-0.5
   C. Re0.8, Re0.5
   D. Re-0.8, Re0.5

9. The laminar boundary layer thickness in zero pressure gradient flow over a flat plate along the x-direction varies as x0.5 while the thickness of turbulent boundary layer varies as (where, x = distance from the leading edge) ?

   A. x1.5
   B. x0.8
   C. x-1.5
   D. x-0.8

10. Thermal conductivity of a material does not depend upon its_____________________?

    A. Mass
    B. Volume
    C. Surface area
    D. All A, C & C