The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) ?

Related Mcqs:

1. The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be_______________?

   A. Parabolic
   B. Hyperbolic
   C. Straight line
   D. None of these

2. Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the___________________?

   A. Length of the pipe
   B. Diameter of the pipe
   C. Density of the fluid
   D. Velocity of the fluid

3. Reynolds number of a fluid flowing in a circular pipe is 10,000. What will be the Reynolds number when the fluid velocity is decreased by 30% & the pipe diameter is increased by 30% ?

   A. 9,100
   B. 13,000
   C. 7,000
   D. 2,550

4. Gage pressure within a spherical droplet of a fluid is ‘p’. What will be gage pressure within a bubble of the same size & of the same fluid ?

   A. p
   B. 2 p
   C. 0.5 p
   D. 0.25 p

5. The laminar boundary layer thickness in zero pressure gradient flow over a flat plate along the x-direction varies as x0.5 while the thickness of turbulent boundary layer varies as (where, x = distance from the leading edge) ?

   A. x1.5
   B. x0.8
   C. x-1.5
   D. x-0.8

6. An approximately _____________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section ?

   A. Adiabatic
   B. Isothermal
   C. Isentropic
   D. Isochoric

7. Friction factor for fluid flow in pipe does not depend upon the________________?

   A. Pipe length
   B. Pipe roughness
   C. Fluid density & viscosity
   D. Mass flow rate of fluid

8. The friction factor for the turbulent fluid flow in a rough pipe does not depend upon the_________________?

   A. Pipe roughness & pipe diameter
   B. Fluid velocity
   C. Type of flowing fluid
   D. Both B. & C.

9. In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is ______________ °C?

   A. 20
   B. 60
   C. 120
   D. ∞

10. For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be _________________ toys ?

    A. 250
    B. 500
    C. 1000
    D. 3000