A. 100%
B. 80%
C. 50% l
D. 20%
Related Mcqs:
- Infiltration capacity curve is the graphical representation, as to how the infiltration capacity varies with time after rainfall this curve was represented by ____________________?
A. Darcy
B. Horton
C. Lacy
D. Kennedy - The field capacity is the amount of water retained by a saturated soil mass after being acted by gravity. The amount of water required to bring the soil moisture content of that soil up to field capacity is called__________________?
A. Soil-moisture deficiency
B. Field-moisture deficiency
C. Equivalent-moisture deficiency
D. a and b are correct - In case of silt deposition in the dam reservoir to dispose of the effectively ________________ be used?
A. Vortex pipes
B. Silt excluders
C. Silt ejectors
D. All are correct - An escape constructed with masonry or pitched with stones to dispose off surplus of tank or reservoir is called________________?
A. Bye-wash
B. paved-escape
C. Water escape
D. Disposal channel - When reservoir is full on upstream side, the maximum stress comes upon__________________?
A. Top of dam
B. Bottom of dam
C. Face of dam
D. All are correct - When the reservoir is full, the maximum compressive force in a gravity dam is produced ___________________?
A. At the toe
B. At the heel
C. Within the middle third of base
D. At centre of base - A graph which shows the volume of a reservoir or tank at any given water level is called ____________________?
A. Mass curve
B. Volume curve
C. Capacity curve
D. All are correct - The floods which exceeds the designed magnitude of a reservoir is called _______________________?
A. High floods
B. Standard protects flood
C. Intensive flood
D. Storm flood - During the peak stage of river, there exist an out flow from river into the ground water reservoir, in such case river will be called _________________?
A. Influent stream
B. Effluent stream
C. Storm water stream
D. Seepage stream - The losses of irrigation water due to the seepage but That. does not join the under ground reservoir is called __________________?
A. Seepage losses
B. Absorption losses
C. Evaporation losses
D. Percolation losses