The unit step response of the transfer function (2s – 1)/[(3s + 1) (4s + 1)] reaches its final steady state asymptotically after _____________?

Related Mcqs:

1. The initial value (t = 0) of the unit step response of the transfer function [(s + 1)/(2s + 1)] is__________________?

   A. 0
   B. ½
   C. 1
   D. 2

2. The unit step response of the transfer function 1/(s2 + 2s + 3) _______________________?

   A. Has a non-zero slope at the origin
   B. Has a damped oscillatory characteristics
   C. Is overdamped
   D. Is unstable

3. In a closed loop system, the process to be controlled is an integrating process with transfer function 1/2s. The controller proposed to be used in an integral controller with transfer function 1/T1s. When a step change in set point is applied to such a closed loop system, the controlled variable will exhibit__________________?

   A. Overdamped response
   B. Underdamped response
   C. Undamped response
   D. Unstable response

4. The experimental response of the controlled variable y(t) for a step change of magnitude ‘P’ in the manipulated variable x(t) is shown below: The appropriate transfer function of the process is_________________?

   A. (Q/P) e-(Q/R)S/(TdS + 1)
   B. (Q/R) e-TdS/(Q/P) (S + 1)
   C. (Q/P) e-TdS/(Q/R) (S + 1)
   D. (Q/R) e-(P/Q)S/(TdS + 1)

5. The frequency response of a dynamic element shows a constant magnitude ratio at all frequencies. The element exhibits a negative phase shift at all frequencies. The absolute value of the phase shift increases linearly with frequency. The element has the transfer function ?

   A. e-ηS
   B. (T1S + 1)/(T2S + 1)
   C. (T1S/(T2S + 1)
   D. (T1S + 1)/(T2S

6. Response of a system to a sinusoidal input is called _____________ response?

   A. Impulse
   B. Unit step
   C. Frequency
   D. None of these

7. For two non-interacting first order systems connected in series, the overall transfer function is the ______________ of the individual transfer functions?

   A. Product
   B. Ratio
   C. Sum
   D. Difference

8. A non-linear system will have _____________ steady state values?

   A. One
   B. More than one
   C. Two
   D. Three

9. In a single tank system, the transfer function of _____________ to inlet flow rate is 1/(TS+1)?

   A. Outlet flow rate
   B. Level
   C. Both A. & B.
   D. Neither A. nor B.

10. A system with transfer function [(2S/4S) + 1] is of _____________ order?

    A. Zero
    B. 1st
    C. 2nd
    D. 3rd