A. average speed
B. spot speed
C. space-mean speed
D. time-mean speed
Related Mcqs:
- Compared to a level surface, on a descending gradient the stopping sight distance is_______________?
A. less
B. more
C. same
D. dependent on the speed - The ruling design speed on a National Highway in plain terrain as per IRC recommendations is_____________?
A. 60 kmph
B. 80 kmph
C. 100 kmph
D. 120 kmph - The absolute minimum radius of curve for safe operation for a speed of 110 kmph is______________?
A. 110 m
B. 220 m
C. 440 m
D. 577 m - The maximum width of a vehicle as recommended by IRC is________________?
A. 1.85m
B. 2.44 m
C. 3.81 m
D. 4.72 m - Which of the following is known as design capacity ?
A. basic capacity
B. theoretical capacity
C. possible capacity
D. practical capacity - “Dead Slow” is a______________?
A. regulatory sign
B. warning sign
C. informatory sign
D. none of the above - In soils having same values of plasticity index, if liquid limit is increased, then_____________?
A. compressibility and permeability decrease and dry strength increases
B. compressibility, permeability and dry strength decrease
C. compressibility, permeability and dry strength increase
D. compressibility and permeability increase and dry strength decreases - RC-2, MC-2 and SC-2 correspond to_______________?
A. same viscosity
B. viscosity in increasing order from RC-2 to SC-2
C. viscosity in decreasing order from RC-2 to SC-2
D. none of the above - The fundamental factor in the selection of pavement type is_____________?
A. climatic condition
B. type and intensity of traffic
C. subgrade soil and drainage conditions
D. availability of funds for the construction project - In hill roads the side drains arc provided________________?
A. only on the hill side of road
B. only on the opposite side of hill
C. on both sides of road
D. none of the above
