A. very low damping
B. very high damping
C. no damping at all
D. radial field disintegration
Related Mcqs:
- A sensitive galvanometer gives full-scale deflection with 100 mV. If the resistance of the galvanometer is 50? the maximum current that can flow through safely is__________________?
A. 2.0 mA
B. 20 mA
C. 200 mA
D. 0.2 mA - The deflection for 50 division of galvanometer is decreased to 25 divisions by shunt resistance of 12Ω. Galvanometer resistance is_____________?
A. 18Ω
B. 30Ω
C. 24Ω
D. 12Ω - When the coil of the galvanometer is in equilibrium then the deflecting couple is____________________?
A. zero
B. equal to the restoring couple
C. greater than the restoring couple
D. smaller than the restoring couple - Coil of a galvanometer is suspended in a radial magnetic field so that the deflecting torque on the coil is always___________________?
A. BINA cosa
B. BINA sina
C. BINA tana
D. BINA - A galvanometer basically is an instrument used to ____________________?
A. detect current in a circuit
B. measure current flowing through a circuit
C. measure voltage across a circuit
D. measure potential difference between two points in a circuit - A moving coil galvanometer of resistance 100? gives half scale deflection for a current of 20mA. What will be the potential difference across it ?
A. 4 volt
B. 5 volt
C. 2 volt
D. 0.4 volt - The sensitivity of a galvanometer is given by__________________?
A. C/BAN
B. CAN/B
C. BAN/C
D. ABC/N - The effective way to increase the sensitivity of a moving coil galvanometer is to___________________?
A. use a very long and fine suspension
B. use a coil of very large area
C. use a coil with very large number of turns
D. use a very strong magnetic field - The normal ear is the most sensitive in the frequency range___________________?
A. 20000 to 30000 hertz
B. 10 to 20 hertz
C. 2000 to 4000 hertz
D. 6000 to 8000 hertz - The device used for conversion of D.C. to A.C. is called______________?
A. Converter
B. A rectifier
C. Inverter
D. Oscillator