A. Compression
B. Tensile force
C. Shear
D. Transverse bending force
Related Mcqs:
- The principal constituent of set silicate cement matrix is_______________?
A. Hydrated Aluminium phosphate
B. Hydrated Aluminium Phosphate with calcium fluoride
C. Hydrate Aluminosilicate gel
D. Hydrated Aluminium phosphate crystal, CAF2 alluminosiliate gel - In a high copper amalgam the phase, which is eliminated is_______________?
A. Gamma 1
B. Gamma 2
C. Gamma 1 and 2
D. No phase is eliminated - The threshold limit value of mercury exposures is_______________?
A. mg / m3
B. 0.05 mg / m3
C. mg / m3
D. mg / m3 - The plasticizers used in polyether impression material is_______________?
A. polyether polymer
B. Colloidal silica
C. Glycol ether
D. Di-vinyl poly (dimethyl siloxane) - The impression with the least dimensional change upon disinfection is_______________?
A. Addition poly silicone
B. Agar-agar
C. Polysulphide
D. Polyether - The castability of chromium-cobait base metal alloys when compared to gold based noble metal alloys is_______________?
A. More
B. Less
C. Equal
D. Depends on the alloy type - The linear solidification shrinkage of Type IV Ni-Cr based alloys is_______________?
A. 2.3%
B. 1.56%
C. 1.37%
D. 3% - Most biocompatible material in oral cavity is_______________?
A. Platinium
B. Palladium
C. Titanium
D. Gold - The chemical used to etch enamel is_______________?
A. Zinc oxide
B. Methyl methacrylate
C. Phosphoric acid
D. Eugenol - The % of free monomer in a heat – cured acrylic resin is_______________?
A. 3% to 5%
B. 8% to 10%
C. 0.2% to 0.5%
D. 0.6% to 0.8%
