A. Temp of glass slab
B. P:L ratio
C. Consistency of mix
D. Alteration of mixing time
Related Mcqs:
- Increased amount of powder in zinc phosphate cement mixture will cause_______________?
A. Decreased strength
B. Decreased film thickness
C. Decreased solubility
D. Increased setting time - The principle application of zinc phosphate cement is_____________?
A. In final cementation
B. As temporary cementation
C. As a temporary filling material
D. It has less occlusal wear - Advantage of zinc phosphate over GIC is______________?
A. High compressive strength
B. Tensile strength
C. High modulus of elasticity
D. Diametral strength - Frozen slab technique of mixing zinc phosphate is used for_______________?
A. Cementing crowns
B. Temporary dressing
C. base
D. cementing orthodontic bands - The setting of zinc phosphate is accelerated by_____________?
A. Adding a drop of water
B. Increasing mixing time
C. Cooling the slab
D. Adding a drop of oleic acid - The major component of zinc phosphate cement is_____________?
A. Zinc oxide
B. Phosphoric acid
C. Zinc
D. None of the above - The chief advantage of zinc phosphate cement is its___________?
A. Good compressive strength
B. Film thickness
C. Lack of irritation
D. Low solubility - The setting of zinc phosphate may be retarded by ?
A. Increased in the ratio of powder to liquid
B. Diluting the liquid with water
C. Increase the addition of powder to liquid
D. Decrease the addition of powder to liquid - Minimum thickness for type I zinc phosphate cement should be_______________?
A. 15 microns
B. 25 microns
C. 50 microns
D. 100 microns - In non zinc containing dental amalgam alloy the percentage of zinc present is______________?
A. Less than 0.02%
B. Less than 0.1%
C. Less than 0.01%
D. None of the above
