Quartz tungsten light cure device minimum output of energy should not be less than_____________?

Related Mcqs:

1. To cure a heat cure resin, a proper heating cycle is necessary_____________?

   A. To prevent the porosity B. To prevent warpage C. To prevent volume expansion D. All of the above...

2. Light cure system, side effect is____________?

   A. Iritis B. Cataract C. Conjunctivitis D. Retinal damage...

3. The dual cure cements should not be used with light transmitting prostheses thicker than____________?

   A. mm B. 1.5 mm C. mm D. 2.5 mm...

4. Cholesterol levels in abnormal person should be preferably less than_____________?

   A. 200 mg/dl B. 180 mg/dl C. 150 mg/dl D. 120 mg/dl...

5. Acrylic (cold cure)______________?

   A. Melts at 100°C B. Softens at 100°C C. Still requires heat for polymerization D. Produces heat during polymerization...

6. In self-cure acrylic resin, activator is_____________?

   A. Toluidine B. Quaternary ammonium compound C. Benzoyl peroxide D. Tertiary amine...

7. Cold cure acrylic expand in water by___________?

   A. 1% by volume 0.23% by weight B. 10% by volume 0.23% by weight C. 0.1% by volume 0.23% by weight D. None of the above...

8. In heat cure denture base acrylic resins the monomer is___________?

   1. Methacrylate 2. Ethylmethacrylate 3. Methyl ethyl methacrylate 4. Polymethylmethacrylate...

9. To prevent porosity in self-cure acrylic resin, curing should be carried in______________?

   A. Cold water B. Hot water C. Under tap water D. Under vacuum pressure...

10. Quartz in investment material is added for_______________?

    A. Strength B. Expansion components for casting shrinkage C. Decrease strength D. Contraction...