A. Strengthener
B. Binder
C. Pigment
D. Crack minimzer
Related Mcqs:
- For porcelain fused to metal crown, the porcelain should have ______________?
A. High fusion expansion
B. High fusion temperature
C. Linear coefficient of thermal expansion less than that of metal
D. Linear coefficient of thermal expansion more than that of metal - The main difference between dental stone and dental plaster is______________?
A. Chemical composition
B. Self life
C. Sharpe and size of particles
D. Solubility in water - The American dental association (ADA) specification number for non-aqueous elastomeric dental impression material is______________?
A. 19
B. 20
C. 21
D. 26 - Stage recognized in the firing of dental porcelain given below. Which of state is not correct ?
A. Cold stage bisque
B. Low bisque
C. Medium bisque
D. High bisque - To prevent porosity in dental porcelain it should be backed________________?
A. Boric oxide
B. In vacuum
C. For long period
D. Under pressure - Phenomenon in which porcelain appears different under varying light condition is______________?
A. Translucency
B. Refractive optics
C. Metamerism
D. Opacification - High copper dental amalgams are superior to other amalgams because high copper dental amalgems______________?
A. Have less marginal breakdown
B. Are workable at lower Hg-alloy ratio
C. Have a higher ratio of tensile to compressive strength
D. Have less resistance to tarnish and corrosion - Powders of dental plaster and dental stone differ mainly in____________?
A. Solubility
B. Shelf life
C. Chemical formula
D. Particle porosity - For dental amalgam, the elastic modulus and tensile strength is______________?
A. 40 Gpa and 60 – 100 Mpa
B. 21 Gpa and 27 – 55 Mpa
C. 350 Gpa and 10 – 120 Mpa
D. 360 Gpa and 125 – 130 Mpa - In non zinc containing dental amalgam alloy the percentage of zinc present is______________?
A. Less than 0.02%
B. Less than 0.1%
C. Less than 0.01%
D. None of the above
