A. Temporarily cement inlays:
B. Make inlay wax patterns
C. Invest inlay patterns
D. Box models
Related Mcqs:
- The main ingredient of inlay wax is__________________?
A. Candellila wax
B. Paraffin wax
C. Carnauba wax
D. Gum dammar - Component of inlay wax which makes it flake resistant is_____________?
A. Paraffin
B. Carnauba
C. Gum dammar
D. Canadelila - The inlay wax most commonly used for direct technique_____________________?
A. Type 1
B. Type 2
C. Type 3
D. Type 4 - Who was the first person to introduce cast inlay restoration into dentistry ?
A. William H Taggart
B. Buonocore
C. G.V. Black
D. Bowen - Gap between true end of casting ring and wax pattern should be______________?
A. ¼ inch
B. ½ inch
C. 3/8 inch
D. one inch - Wax pattern is ideally invested immediately to decrease the dimensional changes caused by_______________?
A. Decrease flow
B. Continuous expansion
C. Relaxation of the internal stresses
D. Water loss - The sprue in wax pattern should be placed________________?
A. At right angle
B. At 45°C angle
C. At obtuse angle
D. It depend upon type of wax pattern - Boxing wax is also called as________________?
A. Carding wax
B. Inlay wax
C. Utility wax
D. Sticky wax - The ideal temperature of water bath for softening fluid wax is about________________?
A. 51 to 54 degree F
B. 51 to 54 degree C
C. 70 to 75 degree F
D. 70 to 75 degree C - Fins and spines on the casting is seen due to_______________?
A. Prolonged heating:
B. Rapid heating me
C. Water film contamination
D. Too high pressure during casting