Transmission of power from the engine to the rear axle of an automobile is by means of___________________?

Related Mcqs:

1. Automobile steering gear is an example of____________________?

   A. higher pair
   B. sliding pair
   C. turning pair
   D. rotary pair
   E. lower pair

2. Governor is used in automobile to_______________?

   A. decrease the variation of speed
   B. to control
   C. to control SN
   D. all of the above
   E. none of the above

3. In multi-V-belt transmission, if one of the belt is broken, we have to change the_________________?

   A. broken belt
   B. broken belt and its adjacent belts
   C. all the belts
   D. there is no need of changing any one as remaining belts can take care of transmission of load
   E. all the weak belts

4. A foot step bearing and rotor of a vertical turbine form examples of___________________?

   A. incompletely constrained motion
   B. partially constrained motion
   C. completely constrained motion
   D. successfully constrained motion
   E. none of the above

5. Whitworth quick return mechanism is obtained by inversion of___________________?

   A. slider crank mechanism
   B. kinematic chain
   C. five link mechanism
   D. roller cam mechanism
   E. none of the above

6. The Klein’s method of construction for reciprocating engine mechanism _______________?

   A. is based on acceleration diagram
   B. is a simplified form of instantaneous center method
   C. utilises a quadrilateral similar to the diagram of mechanism for reciprocating engine
   D. enables determination of Corioli’s component
   E. none of the above

7. The number of links and instantaneous centers in a reciprocating engine mechanism are ___________________?

   A. 4, 4
   B. 4, 5
   C. 5, 4
   D. 6, 4
   E. 4, 6

8. In automobiles the power is transmitted from gear box to differential through _________________?

   A. bevel gear
   B. universal joint
   C. Hooke’s joint
   D. Knuckle joint
   E. Oldham’s coupling

9. T Jie horse power transmitted by a belt is dependent upon _________________?

   A. tension on tight side of belt
   B. tension on slack side of belt
   C. radius of pulley
   D. speed of pulley
   E. all of the above

10. To transmit power from one rotating shaft to another whose axes are neither parallel nor intersecting, use__________________?

    A. spur gear
    B. spiral gear
    C. bevel gear
    D. worm gear
    E. crown gear