The indicator using Watt mechanism is known as________________?

Related Mcqs:

1. A typewriter mechanism has 7 number of binary joints, six links and none of higher pairs. The mechanism is________________?

   A. kinematically sound
   B. not sound
   C. soundness would depend upon which link is kept fixed
   D. data is not sufficient to determine same
   E. none of the above

2. The velocity of any point in mechanism relative to any other point on the mechanism on velocity polygon is represented by the line________________?

   A. joining the corresponding points
   B. perpendicular to line as per A.
   C. not possible to determine with these data
   D. at 45° to line as per A.
   E. none of the above

3. The maximum value of the pressure angle in case of cam is kept as________________?

   A. 10°
   B. 14°
   C. 20°
   D. 30°
   E. 25°.

4. The e.g. of a link in any mechanism would experience_________________?

   A. no acceleration
   B. linear acceleration
   C. angular acceleration
   D. both angular and linear accelerations
   E. none of the above

5. The Ackermann steering mechanism is preferred to the Davis type in automobiles because____________________?

   A. the former is mathematically accurate
   B. the former is having turning pair
   C. the former is most economical
   D. the former is most rigid
   E. none of thfr above

6. A panto graph is a mechanism with___________________?

   A. lower pairs
   B. higher pairs
   C. rolling pairs
   D. turning pairs
   E. spherical pairs

7. A cam mechanism imparts following motion___________________?

   A. rotating
   B. oscillating
   C. reciprocating
   D. all of the above
   E. none of the above

8. In a mechanism, usually one link is fixed. If the fixed link is changed in a kinematic chain, then relative motion of other links_________________?

   A. will remain same
   B. will change
   C. could change or remain unaltered depending oh which link is fixed
   D. will not occur
   E. none of the above

9. In its simplest form, a cam mechanism consists of following number of links___________________?

   A. 1
   B. 2
   C. 3
   D. 4
   E. none

10. An eccentric sheave pivoted at one point rotates and transmits oscillatory motion to a link whose one end is pivoted and other end is connected to it. This mechanism has___________________?

    A. 2 links
    B. 3 links
    C. 4 links
    D. 5 links
    E. none of the above