A. displacement diagram
B. velocity diagram
C. acceleration diagram
D. all of the above
E. none of the above
Related Mcqs:
- In a four-bar chain it is required to give an oscillatory motion to the follower for a continuous rotation of the crank. For the lengths of 50 mm of crank and 70 mm of the follower, determine theoretical maximum length of coupler. The distance between fixed pivots of crank and followers is________________________?
A. 95 mm
B. slightly less than 95 mm
C. slightly more than 95 mm
D. 45 mm
E. none of the above - For S.H.M. cam, the acceleration of the follower at the ends of the stroke and aimidstroke respectively, is__________________?
A. maximum and zero
B. zero and maximum
C. minimum and maximum
D. zero and minimum
E. maximum and minimum - A cam with a roller follower would con stitute following type of pair______________?
A. lower pair
B. higher pair
C. open pair
D. close pair
E. cam pair - Which of the following disciplines provides study of the relative motion between the parts of a machine and the forces acting on the parts__________________?
A. theory of machines
B. applied mechanics
C. mechanisms
D. kinetics
E. kinematics - Which of the following disciplines provides study of inertia forces arising from the combined effect of the mass and the motion of the parts_______________?
A. theory of machines
B. applied mechanics
C. mechanisms
D. kinetics
E. kinematics - Which of the following disciplines provides study of the relative motion between the parts of a machine and the forces acting on the parts___________________?
A. theory of machines
B. applied mechanics
C. mechanisms
D. kinetics
E. kinematics - If some links are connected such that motion between them can take place in more than one direction, it is called_______________?
A. incompletely constrained motion
B. partially constrained motion
C. completely constrained motion
D. successfully constrained motion
E. none of the above - The tendency of a body to resist change from rest or motion is known as_______________?
A. mass
B. friction
C. inertia
D. resisting force
E. resisting torque - In a mechanism, usually one link is fixed. If the fixed link is changed in a kinematic chain, then relative motion of other links_________________?
A. will remain same
B. will change
C. could change or remain unaltered depending oh which link is fixed
D. will not occur
E. none of the above - An eccentric sheave pivoted at one point rotates and transmits oscillatory motion to a link whose one end is pivoted and other end is connected to it. This mechanism has___________________?
A. 2 links
B. 3 links
C. 4 links
D. 5 links
E. none of the above
