Cam size depends upon__________________?

Related Mcqs:

1. The pressure angle of a cam depends upon___________________?

   A. offset between centre lines of cam and follower
   B. lift of follower
   C. angle of ascent
   D. sum of radii of base circle and roller follower
   E. all of the above

2. For S.H.M. cam, the acceleration of the follower at the ends of the stroke and aimidstroke respectively, is__________________?

   A. maximum and zero
   B. zero and maximum
   C. minimum and maximum
   D. zero and minimum
   E. maximum and minimum

3. A cam mechanism imparts following motion___________________?

   A. rotating
   B. oscillating
   C. reciprocating
   D. all of the above
   E. none of the above

4. Angle of ascent of cam is defined as the angle___________________?

   A. during which the follower returns to its initial position
   B. of rotation of the cam for a definite displacement of the follower
   C. through which the cam rotates during the period in which the follower remains in highest position
   D. moved by the cam from the instant the follower begins to rise, till it reaches its highest position
   E. moved by the cam from beginning oi ascent to the termination of descent

5. Angle of action of cam is defined as the angle ____________________?

   A. during which the follower returns to its initial position
   B. of rotation of the cam for a definite displacement of the follower
   C. through which the cam rotates during the period in which the follower remains in the highest position
   D. moved by the cam from the instant the follower begins to rise, till it reaches its highest position
   E. moved by the cam from beginning of ascent to the termination of descent

6. Cam angle is defined as the angle_________________?

   A. during which the follower returns to its initial position
   B. of rotation of the cam for a definite displacement of the follower
   C. through which, the cam rotates during the period in which the follower remains in the highest position
   D. moved by the cam from the instant the follower begins to rise, till it reaches its highest position
   E. moved by the can from beginning of i ascent to the termination of descent

7. Angle of dwell of cam is defined as the angle________________?

   A. during which the follower returns to its initial position
   B. of rotation of the cam for definite dis¬placement of the follower
   C. through which the cam rotates during the period in which the follower remains in the highest position
   D. moved by the cam from the instant the follower begins to rise, till it reaches its highest position
   E. moved by the cam from a beginning of ascent to the termination of descent

8. Angle of descent of cam is defined as the angle__________________?

   A. during which the follower returns to its initial position
   B. of rotation of the cam for a definite displacement of the follower
   C. through which the cam rotates during the period in which the follower remains in the highest position
   D. moved by the cam from the instant the follower begins to rise, till it reaches its highest position
   E. moved by the cam from beginning of ascent to the termination of descent

9. The maximum value of the pressure angle in case of cam is kept as________________?

   A. 10°
   B. 14°
   C. 20°
   D. 30°
   E. 25°.

10. A cam with a roller follower would con stitute following type of pair______________?

    A. lower pair
    B. higher pair
    C. open pair
    D. close pair
    E. cam pair