A. more
B. less
C. same
D. zero
E. negative, i.e. fuel would be generated
Related Mcqs:
- In order to have constant clain reaction to produce a constant rate of heat output, the value of ratio of the number of neutrons in one generation to the number of neutrons in the immediately preceding generation must be________________?
A. greater than 1.0
B. less than 1.0
C. equal to zero
D. equal to 1.0
E. equal to infinity - The presence of reflector in nuclear power plants results in___________________?
A. increased production of neutrons
B. complete absorption of neutrons
C. controlled production of neutrons
D. decreased leakage of neutrons
E. decrease of speed of neutrons - Reflector in nuclear plants is used to________________?
A. return the neutrons back into the core
B. shield the radioactivity completely
C. check polllution
D. conserve energy
E. is not used - The efficiency of a nuclear power plant in comparsion to a conventional thermal power plant is________________?
A. same
B. more
C. less
D. may be less or mote depending on size
E. unpredictable - The efficiency of a nuclear power plant in comparison to conventional and nuclear consideration is__________________?
A. higher cost of nuclear fuel
B. high initial cost
C. high heat rejection in condenser
D. lower temperature and pressure condi-tions
E. nuclear hazard risk - The most practical fuel for a thermo-nuclear reactor, both from econocical and nuclear consideration is____________________?
A. plutonium
B. uranium
C. deuterium
D. thorium
E. lithium - The nuclear power plant at Tarapur has the following reactor________________?
A. fast breeder
B. pressurised water
C. boiling water
D. sodium graphite
E. none of the above - A fission chain reaction in uranium can be developed by________________?
A. slowing down fast neutrons so that Uz fission continues by slow motion neutrons
B. accelerating fast neutrons
C. absorbing all neutrons
D. using moderator
E. enriching U235 - Solid- fuel for nuclear reactions may be fabricated into various small shapes such as___________________?
A. plates
B. pallets
C. pins
D. any one of the above
E. none of the above - In triggering fission, which type of neutrons are more effective_________________?
A. fast
B. slow
C. in bulk
D. static
E. activated