A. atmospheric temperature
B. 500-600°C
C. 70O-850°C
D. 95O-1100°C
E. 120O-1500°C
Related Mcqs:
- Coke is produced by__________________?
A. pulverising coal in inert atmosphere
B. heating wood in a limited supply of air at temperatures below 300GC
C. strongly heating coal continuously for about 48 hours in the absence of air in a closed vessel
D. binding the pulverised coal into brick-etts
E. enriching carbon in the coal - Paramagnetic alpha iron changes to gamma iron at_______________?
A. 770°C
B. 910°C
C. 1440°C
D. 1539°C
E. none of the above - Hard coke is used in________________?
A. cement industry
B. thermal power plant
C. blast furnace
D. domestic use
E. locomotives - Carbonation of coal is the process of________________________?
A. pulverising coal in inert atmosphere
B. heating wood in a limited supply of air at temperatures below 300°C
C. strongly heating coal continuously for about 48 hours in the absence of air in a closed vessel
D. binding the pulverised coal into brick-ettes
E. enriching carbon in the coal - The coal requirement per kW hour generation in the thermal power plant is of the order of__________________?
A. 0.1 to 0.2 kg
B. 0.2 to 0.4 kg
C. 0.6 to 0.8 kg
D. 1.0 to 1.5 kg
E. 1.5 to 2 kg - The bituminous coal is non-caking if its carbon content is_______________?
A. 78-81%
B. 81-85%
C. 85-90%
D. 90-95%
E. 95-100%. - During storage, the heating value of coal __________________?
A. increases
B. decreases
C. remains constant
D. may increase or decrease depending upon the method of storage
E. none of the above - Calorific value of coal is of the order of _______________________?
A. 200-400 kcal/kg
B. 800-1200 kcal/kg
C. 2000-4000 kcal/kg
D. 5000-8000 kcal/kg
E. 8000-10,000 kcal/kg - Sulphur in coal results in___________________?
A. causing clinkering and slagging
B. corroding air heaters
C. spontaneous combustion during coal storage
D. facilitating ash precipitation
E. all of the above - The behaviour of coal in a furnace is determained by_______________________?
A. the content of sulphur
B. the content of ash and heating value
C. the proximate analysis
D. the exact analysis
E. its type