A. ratio of inertial force to force due to viscosity
B. ratio of inertial force to force due to gravitation
C. ratio of inertial force to force due to surface tension
D. all the four ratios of inertial force to force due to viscosity, gravitation, sur-face tension, and elasticity
Related Mcqs:
- A model of torpedo is tested in a towing tank at a velocity of 25 m/sec. The prototype is expected to attain a velocity of 5 m/sec. What model scale has been used ?
A. 1 : 5
B. 1 : 2.5
C. 1 :25
D. 1:V5″
E. 1 : 53/2 - A ship whose hull length is 100 m is to travel at 10 m/sec. For dynamic similarity, at what velocity should a 1:25 model be towed through water ?
A. 10 m/sec
B. 25 m/sec
C. 2 m/sec
D. 50 m/sec
E. 250 m/sec - A model of a reservior is drained in 4 mts by opening the sluice gate. The model scale is 1: 225. How long should it take to empty the prototype ?
A. 900 minutes
B. 4 minutes
C. 4 x (225)3/2 minutes
D. 4 (225)1/3 minutes
E. 4 x V225 minutes - In which of the following cases, consideration of creep is important_________________?
A. flywheel of steam engine
B. cast iron pipes”
C. cycle chains
D. gas turbine blades
E. piston I.C. engine - Depth of hardness of steel is increased by addition of_________________?
A. nickel
B. chromium
C. tungsten
D. vanadium
E. ell of the above - Corrosion resistance of steel is increased by addition of________________?
A. chromium and nickel
B. sulphur, phosphorus, lead
C. vanadium, aluminium
D. tungsten, molybdenum, vanadium, chromium
E. zinc - Addition of manganese to aluminium results in__________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - Addition of silicon to aluminium results in____________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - Addition of lead and bismuth to aluminium results in_________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - Addition of copper to aluminium results in_____________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above
