A. it allows maximum compression to be achieved
B. it greatly affects volumetric efficiency
C. it results in minimum work
D. it permits isothermal compression
E. none of the above
Related Mcqs:
- Volumetric efficiency of a compressor with clearance volume ________________?
A. increases with increase in compression ratio
B. decreases with increase in compression ratio
C. in not dependent upon compression ratio
D. may increase/decrease depending on compressor capacity
E. unpredictable - An ideal air compressor cycle without clearance on p-v diagram can be represented by following processes________________?
A. one adiabatic, two isobaric, and one constant volume
B. two adiabatic and two isobaric
C. two adiabatic, one isobaric and one constant volume
D. one adiabatic, one isobaric and two constant volume
E. two isobaric, two adiabatic and one constant volume - An ideal air compressor cycle with clearance on p-v diagram can be represented by following processes_______________?
A. one adiabatic, two isobaric, and one constant volume
B. two adiabatic and two isobaric
C. two adiabatic, one isobaric and one constant volume,
D. one adiabatic, one isobaric and two constant volume
E. two isobaric, two adiabatic and one constant volume - Cylinder clearance in a compressor should be _________________?
A. as large as possible
B. as small as possible
C. about 50% of swept volume
D. about 100% of swept volume
E. none of the above - Volumetric efficiency of a compressor without clearance volume________________?
A. increases with increase in compression ratio
B. decreases with increase in compression ratio
C. is not dependent upon compressin ratio
D. may increase/decrease depending on compressor capacity
E. unpredictable - The net work input required for compressor with increase in clearance volume_____________________?
A. increases
B. decreases
C. remains same
D. increases/decreases depending on com-pressor capacity
E. unpredictable - In a compressor, free air delivered is the actual volume delivered at the stated pressure reduced to ____________________?
A. N.T.P. conditions
B. intake temperature and pressure conditions
C. 0°C and 1 kg/cm2
D. 20°C and 1 kg/cm2
E. none of the above - Clearance volume in actual reciprocating compressors is essential __________________?
A. to accommedate Valves in the cylinder head
B. to provide cushioning effect
C. to attain high volumetric efficiency
D. to avoid mechanical bang of piston with cylinder head
E. to provide cushioning effect and also to avoid mechanical bang of piston with cylinder head - What will be the volume of air at 327°C if its volume at 27°C is 1.5 m3/mt ?
A. 3 m3/mt
B. 1.5 m3/mt
C. 18 m3/mt
D. 6 m3/mt
E. 0.75 m3/mt - The ratio of work doen per cycle to the swept volume in case of compressor is called ______________?
A. compression index
B. compression ratio
C. compressor efficiency
D. mean effective pressure
E. compressor effectiveness
