A. 1.03 kg/cm2
B. 1.06 kg/cm2
C. 1.00 kg/cm2
D. 0.53 kg/cm2
E. 0.5 kg/cm2
Related Mcqs:
- 1 m of air at atmospheric condition weighs approximately__________________?
A. 0.5 kg
B. 1.0 kg
C. 1.3 kg
D. 2.2 kg
E. 3.2 kg - The following is true for an open cycle gas turbine having exhaust heat exchanger. Atmospheric air before entering the compressor is____________________?
A. heated
B. compressed air before entering the combustion chamber is heated
C. bled gas from turbine is heated and readmitted for complete expansion
D. exhaust gases drive the compressor
E. part of exhaust gases are heated and mixed up with atmospheric air to utilise exhaust heat - Free air is the air at________________?
A. atmospheric conditions at any specific location
B. 20°C and 1 kg/cm2 and relative humidity of 36%
C. 0°C and standard atmospheric conditions
D. 15°C and 1 kg/cm2
E. 25°C, 1 kg/cm2 and relative humidity of 50%. - Standard air is the air at_____________________?
A. atmospheric conditions at any specific location
B. 20°C and 1 kg/cm2 and relative humidity 36%
C. 0°C and standard atmospheric conditions
D. 15°C and 1 kg/cm2
E. 25°C, 1 kg/cm2 and RH of 60%. - The volumetric efficiency of a compressor falls roughly as follows for every 5°C increase in atmospheric temperature__________________?
A. 0.1%
B. 0.5%
C. 1%
D. 5%
E. 10%. - For supplying intermittent small quantity of air at high pressure, following compressor is best suited__________________?
A. centrifugal
B. reciprocating
C. axial
D. screw
E. turbo jet - In a compressor, free air delivered is the actual volume delivered at the stated pressure reduced to ____________________?
A. N.T.P. conditions
B. intake temperature and pressure conditions
C. 0°C and 1 kg/cm2
D. 20°C and 1 kg/cm2
E. none of the above - Maximum delivery pressure is a rotary air compressor is of the order of__________________?
A. 6 kg/cm2
B. 10 kg/cm2
C. 16 kg/cm2
D. 25 kg/cm2
E. 40 kg/cm2 - The ratio of the increase in pressure in rotor blades to total increase in pressure in the stage is called__________________?
A. pressure ratio
B. pressure coefficient
C. degree of reaction
D. slip factor
E. stage factor - There is a certain pressure ratio (optimum) for a gas turbine at which its thermal efficiency is maximum. With increase in turbine temperature, the value of pressure ratio for the peak efficiency would__________________?
A. remain same
B. decrease
C. increase
D. unpredictable
E. none of the above