A. more power
B. less power
C. same power
D. more/less power depending on other factors
E. none of the above
Related Mcqs:
- The compressor performance at higher altitude compared to sea level will be _______________?
A. same
B. higher
C. lower
D. dependent on other factors
E. none of the above - For supplying intermittent small quantity of air at high pressure, following compressor is best suited__________________?
A. centrifugal
B. reciprocating
C. axial
D. screw
E. turbo jet - The overall isothermal eiffciency of compressor is defined as the ratio of_______________?
A. isothermal h.p. to the BHP of motor
B. isothermal h.p. to adiabatic h.p.
C. power to drive compressor to isothermal h.p.
D. work to compress air isothermally to work for actual compression
E. isothermal work to ideal work - The compressor capacity with decrease in suction temperature_________________?
A. increases
B. decreases
C. remains unaffected
D. may increase or decrease depending on compressor capacity
E. increases upto certain limit and then decreases - An ideal air compressor cycle with clearance on p-v diagram can be represented by following processes_______________?
A. one adiabatic, two isobaric, and one constant volume
B. two adiabatic and two isobaric
C. two adiabatic, one isobaric and one constant volume,
D. one adiabatic, one isobaric and two constant volume
E. two isobaric, two adiabatic and one constant volume - In multistage compressor, the isothermal compression is achieved by_________________?
A. employing intercooler
B. by constantly cooling the cylinder
C. by running compressor at very slow speed
D. by insulating the cylinder
E. none of the above - The thrust on the rotor in a centrifugal compressor is produced by________________?
A. radial component
B. axial component
C. tangential component
D. resultant component - For slow-speed large capacity compressor, following type of valve will be best suited________________?
A. poppet valve
B. mechanical valve of the corliss, sleeve, rotary or semirotary type
C. disc or feather type
D. any of the above
E. none of the above - Which is false statement about advantages of multistage compressor in comparison to single stage compressor_________________?
A. less power requirement
B. better mechanical balance
C. less loss of air due to leakage past the cylinder
D. more effective lubrication
E. lower volumetric efficiency - Losses in a centrifugal compressor are due to__________________?
A. inlet losses
B. impeller channel losses
C. diffuser losses
D. all of the above
E. none of the above