The power factor of industrial loads is generally______________?

Related Mcqs:

1. The loads on distributors systems are generally__________________?

   A. balanced B. unbalanced C. either of the above D. none of the above...

2. Large industrial consumers are supplied electrical energy at__________________?

   A. 400 V B. 11 kV C. 66 kV D. 400 kV...

3. For transmission of power over a distance of 200 km, the transmission voltage should be_________kv?

   A. 132 kV B. 66 kV C. 33 kV D. 11 kV...

4. For transmission of power over a distance of 500 km, the transmission voltage should be in the range?

   A. 150 to 220 kV B. 100 to 120 kV C. 60 to 100 kV D. 20 to 50 kV...

5. By which of the following systems electric power may be transmitted ?

   A. Overhead system B. Underground system C. Both A. and (b) D. None of the above...

6. Transmitted power remaining the same, if supply voltage of a D.C. 2-wire feeder is increased 100 percent, saving in copper is____________________?

   A. 25 percent B. 50 percent C. 75 percent D. 100 percent...

7. A feeder, in a transmission system, feeds power to________________?

   A. distributors B. generating stations C. service mains D. all of the above...

8. The power transmitted will be maximum when____________?

   A. corona losses are minimum B. reactance is high C. sending end voltage is more D. receiving end voltage is more...

9. Which of the following distribution systems is more reliable?

   A. Radial system B. Tree system C. Ring main system D. All are equally reliable...

10. Electro-mechanical voltage regulators are generally used in___________?

    A. reactors B. generators C. transformers D. all of the above...