A. small air gap
B. large leakage flux
C. laminated silicon steel core
D. fewer rotating parts
Related Mcqs:
- The no-load current drawn by transformer is usually what per cent of the full-load current ?
A. 0.2 to 0.5 per cent
B. 2 to 5 per cent
C. 12 to 15 per cent
D. 20 to 30 per cent - Which of the following is the main advantage of an auto-transformer over a two winding transformer?
A. Hysteresis losses are reduced
B. Saving in winding material
C. Copper losses are negligible
D. Eddy losses are totally eliminated - The changes in volume of transformer cooling oil due to variation of atmospheric temperature during day and night is taken care of by which part of transformer?
A. Conservator
B. Breather
C. Bushings
D. Buchholz relay - In a step-down transformer, there is a change of 15 A in the load current. This results in change of supply current of_________________?
A. less than 15 A
B. more than 15 A
C. 15 A
D. none of the above - The transformer ratings are usually expressed in terms of______________?
A. volts
B. amperes
C. kW
D. kVA - Gas is usually not liberated due to dissociation of transformer oil unless the oil temperature exceeds?
A. 50°C
B. 80°C
C. 100°C
D. 150°C - The no load current in a transformer lags behind the applied voltage by an angle of about_____________?
A. 180°
B. 120″
C. 90°
D. 75° - No-load current of a transformer has_____________?
A. has high magnitude and low power factor
B. has high magnitude and high power factor
C. has small magnitude and high power factor
D. has small magnitude and low power factor - When secondary of a current transformer is open-circuited its iron core will be__________?
A. hot because of heavy iron losses taking place in it due to high flux density
B. hot because primary will carry heavy current
C. cool as there is no secondary current
D. none of above will happen - Which of the following statements regarding an idel single-phase transformer having a turn ratio of 1 : 2 and drawing a current of 10 A from 200 V A.C. supply is incorrect?
A. Its secondary current is 5 A
B. Its secondary voltage is 400 V
C. Its rating is 2 kVA
D. Its secondary current is 20 A
E. It is a step-up transformer
