A. the magnetising current of the rotor will decrease
B. the power factor will decrease
C. speed of motor will increase
D. the windage losses will increase
Advertisement
Related Mcqs:
- In case the air gap in an induction motor is increased?
- A. the magnetising current of the rotor will decrease B. the power factor will decrease C. speed of motor will increase D. the windage losses will increase...
- The good power factor of an induction motor can be achieved if the average flux density in the air gap is___________?
- A. absent B. small C. large D. infinity...
- In an induction motor if air-gap is increased__________?
- A. the power factor will be low B. windage losses will be more C. bearing friction will reduce D. copper loss will reduce In an induction motor...
- Slip ring motor is preferred over squirrel cage induction motor where___________?
- A. high starting torque is required B. load torque is heavy C. heavy pull out torque is required D. all of the above...
- In case of a double cage induction motor, the inner cage has__________?
- A. high inductance arid low resistance B. low inductance and high resistance C. low inductance and low resistance D. high inductance and high resistance...
- The torque of an induction motor is___________?
- A. directly proportional to slip B. inversely proportional to slip C. proportional to the square of the slip D. none of the above...
- The torque developed in the cage induction motor with autostarter is___________?
- A. k/torque with direct switching B. K x torque with direct switching C. K2 x torque with direct switching D. k2/torque with direct switching...
- If any two phases for an induction motor are interchanged_______?
- A. the motor will run in reverse direction B. the motor will run at reduced speed C. the motor will not run D. the motor will burn...
- The speed of a squirrel-cage induction motor can be controlled by all of the following except_____________?
- A. changing supply frequency B. changing number of poles C. changing winding resistance D. reducing supply voltage...
- Insertion of resistance in the rotor of an induction motor to develop a given torque?
- A. decreases the rotor current B. increases the rotor current C. rotor current becomes zero D. rotor current rernains same...
Advertisement