A. nonlinear elements only
B. linear elements only
C. linear, non-linear, active and passive elements
D. linear, non-linear, active, passive, time varying as wells as time-in-variant elements
Related Mcqs:
- Kirchhoff s law is not applicable to circuits with____________?
A. lumped parameters
B. passive elements
C. distributed parameters
D. non-linear resistances - Between the branch voltages of a loop the Kirchhoff s voltage law imposes_____________?
A. non-linear constraints
B. linear constraints
C. no constraints
D. none of the above - Kirchhoff s current law states that
A. net current flow at the junction is positive
B. Hebraic sum of the currents meeting at the junction is zero
C. no current can leave the junction without some current entering it.
D. total sum of currents meeting at the junction is zero - Kirchhoff s law is applicable to____________?
A. passive networks only
B. a.c. circuits only
C. d.c. circuits only
D. both a.c. as well d.c. circuits - “Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load”. The above statement is associated with____________?
A. Millman’s theorem
B. Thevenin’s theorem
C. Superposition theorem
D. Maximum power transfer theorem - The superposition theorem requires as many circuits to be solved as there are____________?
A. sources, nodes and meshes
B. sources and nodes
C. sources
D. nodes - Superposition theorem can be applied only to circuits having____________?
A. resistive elements
B. passive elements
C. non-linear elements
D. linear bilateral elements - According to Kirchhoffs voltage law, the algebraic sum of all IR drops and e.m.fs. in any closed loop of a network is always____________?
A. negative
B. positive
C. determined by battery e.m.fs.
D. zero - Kirchhoffs voltage law is related to_____________?
A. junction currents
B. battery e.m.fs.
C. IR drops
D. both B. and C.
E. none of the above - To determine the polarity of the voltage drop across a resistor, it is necessary to know___________?
A. value of current through the resistor
B. direction of current through the resistor
C. value of resistor
D. e.m.fs. in the circuit
