A. increase in plate area and decrease in distance between the plates
B. increase in plate area and distance between the plates
C. decrease in plate area and value of applied voltage
D. reduction in plate area and distance between the plates
Related Mcqs:
- What is the value of capacitance that must be connected in parallel with 50 pF condenser to make an equivalent capacitance of 150 pF ?
A. 50 pF
B. 100 pF
C. 150 pF
D. 200 pF - The capacitance between two plates increases with____________?
A. shorter plate area and higher applied voltage
B. shorter plate area and shorter distance between them
C. larger plate area, longer distance between plates and higher,applied voltage
D. larger plate area and shorter distance between plates - A capacitor stores 0.24 coulombs at 10 volts. Its capacitance is_____________?
A. 0.024 F
B. 0.12 F
C. 0.6 F
D. 0.8 F - If three 15 uF capacitors are connected in series, the net capacitance is
A. 5 uF
B. 30 uF
C. 45 uF
D. 50 uF - For which of the following parameter variation, the capacitance of the capacitor remains unaffected ____________?
A. Distance between plates
B. Area of the plates
C. Nature of dielectric
D. Thickness of the plates - The unit of capacitance is__________?
A. henry
B. ohm
C. farad
D. farad/m - A capacitance is a circuit component that opposes the change in circuit__________?
A. Current
B. Voltage
C. impedance
D. None of the above - The bridge used for the measurement of the value of the capacitance is____________?
A. Wien’s bridge
B. Wheatstone bridge
C. Schering bridge
D. Hay’s bridge - A capacitor having capacitance of 5 uF is charged to a potential difference of 10,000 V. The energy stored in the capacitor is__________?
A. 50 joules
B. 150 joules
C. 200 joules
D. 250 joules - The value of the capacitance depends upon the________________?
A. voltage applied
B. thickness of the capacitor plates
C. geometry of the capacitor
D. dinsity of the capacitor plates