A. F/A
B. F/2A
C. 3F/2A
D. 2F/3A
Related Mcqs:
- The ratio of maximum shear stress to average shear stress of a circular beam, is________________?
A. 2/3
B. 3/2
C. 3/4
D. 4/3 - A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is____________________?
A. M/T
B. T/M
C. 2M/ T
D. 2T/M - The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is_______________?
A. 1/2
B. 2/3
C. 1/4
D. 1/3 - Y are the bending moment, moment of inertia, radius of curvature, modulus of If M, I, R, E, F, and elasticity stress and the depth of the neutral axis at section, then________________?
A. M/I = R/E = F/Y
B. I/M = R/E = F/Y
C. M/I = E/R = E/Y
D. M/I = E/R = Y/F - The radius of gyration of a rectangular section (depth D, width B) from a centroidal axis parallel to the width is__________________?
A. D/2
B. D
C. D
D. D - The ratio of maximum and average shear stresses on a rectangular section, is________________?
A. 1
B. 1.25
C. 1.5
D. 2.5 - The ratio of shear stress and shear strain of an elastic material, is________________?
A. Modulus of Rigidity
B. Shear Modulus
C. Modulus of Elasticity
D. Both A. and B - The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to flowing liquid, is__________________?
A. ½
B. 1
C. 1½
D. 2 - inertia of a rectangular section of width and depth about an axis passing The moment of through C.G. and parallel to its width is_______________?
A. BD²/6
B. BD3/6
C. BD3/12
D. B²D/6 - The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is___________________?
A. 1/8
B. 1/4
C. 1/2
D. 1/3
