A. Circle
B. Parabola
C. Ellipse
D. Straight line
Related Mcqs:
- The locus of the moment of inertia about inclined axes to the principal axis, is______________?
A. Straight line
B. Parabola
C. Circle
D. Ellipse - The ratio of maximum shear stress to average shear stress of a circular beam, is________________?
A. 2/3
B. 3/2
C. 3/4
D. 4/3 - The locus of reaction of a two hinged semi-circular arch, is_________________?
A. Straight line
B. Parabola
C. Circle
D. Hyperbola - The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is_______________?
A. 1/2
B. 2/3
C. 1/4
D. 1/3 - A shaft is subjected to bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft, is____________________?
A. M/T
B. T/M
C. 2M/ T
D. 2T/M - The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is___________________?
A. 1/8
B. 1/4
C. 1/2
D. 1/3 - The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to flowing liquid, is__________________?
A. ½
B. 1
C. 1½
D. 2 - A load of 1960 N is raised at the end of a steel wire. The minimum diameter of the wire so that stress in the wire does not exceed 100 N/mm2 is________________?
A. 4.0 mm
B. 4.5 mm
C. 5.0 mm
D. 5.5 mm - The ratio of shear stress and shear strain of an elastic material, is________________?
A. Modulus of Rigidity
B. Shear Modulus
C. Modulus of Elasticity
D. Both A. and B - For permissible shear stress fs, the torque transmitted by a thin tube of mean diameter D and wall thickness t, is________________?
A. ( /2) t fs
B. ( /2) t fs
C. D2t fs
D. ( /4) fs
