A. metres2 per sec
B. kg sec/metre
C. newton-sec per metre2
D. newton-sec per metre
E. none of the above
Related Mcqs:
- The units of kinematic viscosity are_______________?
A. metres2 per sec
B. kg sec/meter
C. newton-sec per meter
D. newton-sec per meter
E. none of the above - The units of dynamic or absolute viscosity are_______________?
A. metres2 per sec
B. kg sec/meter
C. newton-sec per meter
D. newton-sec2 per meter
E. none of the above - The fluid forces considered in the Navier Stokes equation are__________________?
A. gravity, pressure and viscous
B. gravity, pressure and turbulent
C. pressure, viscous and turbulent
D. gravity, viscous and turbulent
E. none of the above - Skimming tanks are__________________?
A. Used to remove the grease and oil
B. Those from which sludge is skimmed out
C. Tanks provided with self- cleansing screens
D. Improved version of grit chambers - Hume steel pipes are__________________?
A. Steel pipes
B. Steel shell coated from inside with cement mortar
C. Steel shell coated from outside with cement mortar
D. Both B. and C. - Viscosity of water in comparison to mercury is ______________________?
A. higher
B. lower
C. same
D. higher/lower depending on temperature
E. unpredictable. - The ratio of absolute viscosity to mass density is known as____________________?
A. specific viscosity
B. viscosity index
C. kinematic viscosity
D. coefficient of viscosity
E. coefficient of compressibility - Which of the following is the unit of kinematic viscosity _________________?
A. pascal
B. poise
C. stoke
D. faraday
E. none of the above - Kinematic viscosity is dependent upon________________?
A. pressure
B. distance
C. level
D. flow
E. density - Dynamic viscosity of most of the liquids with rise in temperature____________________?
A. increases
B. decreases
A. remains unaffected
D. unpredictable
E. none of the above
