The rational formula for peak drainage discharge, was evolved by_________________?

Related Mcqs:

1. For estimating the peak run off the rational formula Q = 0.0278 KpA was evolved by______________?

   A. Kinchling B. Lloyd Davis C. Frubling D. All the above...

2. If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by_________________?

   A. Chezy B. Manning C. Bazin D. Kutter...

3. When drainage to sewage ratio is 20, the peak dry weather flow is_______________?

   A. 20% of the design discharge B. Slightly less than 5% of the design discharge C. Slightly more than 5% of the design discharge D. None of these...

4. In a city the ratio of the drainage to sewage is 20, the percentage discharge passing through non-monsoon periods, is_____________________?

   A. 5 B. 10 C. 15 D. 20...

5. The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration for the areas as 30 minutes and using the formula Ps = 900/(t + 60) the maximum run off is__________________?

   A. 0.10 cumec B. 0.12 cumec C. 0.15 cumec D. 0.20 cumec...

6. If the peak discharge of a storm water drain (S.W. Drain) is expected to exceed 150 cumecs, the free board to be provided, is_________________?

   A. 100 cm B. 90 cm C. 80 cm D. 50 cm...

7. A cylindrical ejector having its height 2 m fills after every 10 minutes with a peak sewage discharge of 0.0157 cumec. The diameter of the ejector chamber, is_____________________?

   A. 2.30 m B. 2.40 m C. 2.45 m D. 2.50 m...

8. For a peak discharge of 0.0157 cumec, with a velocity of 0.9 m/sec, the diameter of the sewer main, is________________?

   A. 10 cm B. 12 cm C. 15 cm D. 18 cm...

9. The formula which accepts the value of rugosity coefficient n = 0.012 to be used in Manning’s formula, is given by______________________?

   A. Bazin B. Crimp and Bruges C. William-Hazen D. Kutter...

10. For drainage pipes in buildings the test applied before putting them to use, is__________________?

    A. Water test B. Smoke test C. Straightness test D. All the above...