A. Carbondioxide
B. Hydrogen sulphide
C. Methane
D. All of these
Related Mcqs:
- The most efficient cross-section of sewers in a combined sewerage system is________________?
A. Parabolic
B. Circular
C. Rectangular
D. New egged - In sewers the gas generally found, is_________________?
A. Hydrogen sulphide (H2S)
B. Carbon dioxide (CO2)
C. Methane (CH4)
D. All the above - The gas which may cause explosion in sewers, is_________________?
A. Carbondioxide
B. Methane
C. Ammonia
D. Carbon monoxide - The rational formula for peak drainage discharge, was evolved by_________________?
A. Fruhling
B. Lloyd David
C. Kuichling
D. All of these - If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by_________________?
A. Chezy
B. Manning
C. Bazin
D. Kutter - For estimating the peak run off the rational formula Q = 0.0278 KpA was evolved by______________?
A. Kinchling
B. Lloyd Davis
C. Frubling
D. All the above - Cement concrete sewers are only suitable if non-scouring velocity is between_________________?
A. 2.5 to 3.0 m/sec
B. 3.0 to 4.0 m/sec
C. 3.5 to 4.5 m/sec
D. 4.5 to 5.5 m/sec - Large diameter sewers subjected to external pressure alone, are reinforced ______________________?
A. Near the inner surface of the pipe
B. Near the outer surface of the pipe
C. Both A. and B.
D. With elliptical cage - The gradient of sewers depends upon_________________?
A. Velocity of flow
B. Diameter of the sewer
C. Discharge
D. All the above - In sewers the velocity of flow should not be_________________?
A. More than the self-cleansing velocity
B. Less than the self-cleansing velocity
C. Less than 10 m/sec
D. More than 20 m/sec