A. error due to eccentricity of verniers
B. error due to displacement of station signals
C. error due to wrong adjustment of line of collimation and trunnion axis
D. error due to inaccurate graduation
Related Mcqs:
- Which of the following errors cannot be eliminated by taking both face observations ?
A. error due to horizontal axis not being perpendicular to the vertical axis
B. index error i.e. error due to imperfect adjustment of the vertical circle vernier
C. error due to non-parallelism of the axis of telescope level and line of collimation
D. none of the above - Which of the following errors can be eliminated by taking mean of bot face observations ?
A. error due to imperfect graduations
B. error due to eccentricity of verniers
C. error due to imperfect adjustment of plate levels
D. error due to line of collimation not being perpendicular to horizontal axis - The horizontal angle between the true meridian and magnetic meridian at a place is called______________?
A. azimuth
B. declination
C. local attraction
D. magnetic bearing - The error due to eccentricity of inner and outer axes can be eliminated by________________?
A. reading both verniers and taking the mean of the two
B. taking both face observations and taking the mean of the two
C. double sighting
D. taking mean of several readings distributed over different portions of the graduated circle - Which of the following errors can be neutralised by setting the level midway between the two stations ?
A. error due to curvature only
B. error due to refraction only
C. error due to both curvature and re-fraction
D. none of the above - Which of the following methods of offsets involves less measurement on the ground?
A. method of perpendicular offsets
B. method of oblique offsets
C. method of ties
D. all involve equal measurement on the ground - The process of turning the telescope about the vertical axis in horizontal plane is known as______________?
A. transiting
B. reversing
C. plunging
D. swinging - The difference between a level line and a horizontal line is that_______________?
A. level line is a curved line while hori-zontal line is a straight line
B. level line is normal to plumb line while horizontal line may not be normal to plumb line at the tangent point to level line
C. horizontal line is normal to plumb line while level line may not be normal to the plumb line
D. both are same - Horizontal distances obtained by thermometric observations_________________?
A. require slope correction
B. require tension correction
C. require slope and tension corrections
D. do not require slope and tension corrections - If the intercept on a vertical staff is ob-served as 0.75 m from a tacheometer, the horizontal distance between tacheometer and staff station is________________?
A. 7.5 m
B. 25 m
C. 50
D. 75 m
