Overturning of vehicles on a curve can be avoided by using ________________?

Related Mcqs:

1. The following sights are taken on a “turning point”________________?

   A. foresight only B. backsight only C. foresight and backsight D. foresight and intermediate sight...

2. The number of horizontal cross wires in a stadia diaphragm is ________________?

   A. one B. two C. three D. four...

3. Different grades are joined together by a ________________?

   A. compound curve B. transition curve C. reverse curve D. vertical curve...

4. The angle between the prolongation of the preceding line and the forward line of a traverse is called ________________?

   A. deflection angle B. included angle C. direct angle D. none of the above...

5. The permissible error in chaining for measurement with chain on rough or hilly ground is_____________?

   A. 1 in 100 B. 1 in 250 C. 1 in 500 D. 1 in 1000...

6. If the true bearing of a line AB is 269° 30′, then the azimuth of the line AB is_____________?

   A. 0° 30′ B. 89° 30′ C. 90° 30′ D. 269° 30′...

7. If the magnetic bearing of the sun at a place at noon in southern hemisphere is 167°, the magnetic declination at that place is________________?

   A. 77° N B. 23° S C. 13° E D. 13° W...

8. The suitable contour interval for a map with scale 1 : 10000 is______________?

   A. 2 m B. 5m C. 10 m D. 20 m...

9. If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be________________?

   A. +50 m, +86.6 m B. +86.6 m, -50 m C. +50m, -86.6 m D. +70.7 m,-50 m...

10. Which of the following methods of plane table surveying is used to locate the position of an inaccessible point ?

    A. radiation B. intersection C. traversing D. resection...