A. 2200 kg/m3
B. 2300 kg/m3
C. 2400 kg/m3
D. 2500 kg/m3
Related Mcqs:
- A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is___________________?
A. 30
B. 35
C. 40
D. 45 - The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - The maximum shear stress (q) in concrete of a reinforced cement concrete beam is_____________?
A. Shear force/(Lever arm × Width)
B. Lever arm/(Shear force × Width)
C. Width/(Lever arm × Shear force)
D. (Shear force × Width)/Lever arm - The allowable tensile stress in mild steel stirrups, reinforced cement concrete, is_______________?
A. 1400 kg/cm2
B. 190 kg/cm2
C. 260 kg/cm2
D. 230 kg/cm2 - A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is_________________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - According to I.S. 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than______________?
A. 20 cm
B. 30 cm
C. 40 cm
D. 75 cm - In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called________________?
A. Under-reinforced section
B. Over reinforced section
C. Economic section
D. Critical section - A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2, the Safe load on the column, should not exceed_______________?
A. 4120 kg
B. 41,200 kg
C. 412,000 kg
D. None of these - If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is______________?
A. 37 cm
B. 38 cm
C. 39 cm
D. 40 cm
- The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt________________?
A. Is safe in shear
B. Is unsafe in shear
C. Is over safe in shear
D. Needs redesigning
