A. Distribute the load
B. Resist the temperature stresses
C. Resist the shrinkage stress
D. All the above
Related Mcqs:
- The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than________________?
A. 4 mm
B. 5 mm
C. 6 mm
D. 7 mm - The spacing of transverse reinforcement of column is decided by the following consideration_______________?
A. The least lateral dimension of the column
B. Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column
C. Forty-eight times the diameter of transverse reinforcement
D. All the above - The minimum number of main steel bars provided in R.C.C________________?
A. Rectangular columns is 4
B. Circular columns is 6
C. Octagonal columns is 8
D. All the above - If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is_____________?
A. 10 mm
B. 12 mm
C. 14 mm
D. 16 mm - A ribbed slab is provided for______________?
A. A plain ceiling
B. Thermal insulation
C. Acoustic insulation
D. All the above - The thickness of base slab of a retaining wall generally provided, is_____________?
A. One half of the width of the stem at the bottom
B. One -third of the width of the stem at the bottom
C. One fourth of the width of the steam at the bottom
D. Width of the stem at the bottom - If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance from either end where, is________________?
A. 50 cm
B. 100 cm
C. 150 cm
D. 200 cm - Distribution reinforcement in a simply supported slab, is provided to distribute_______________?
A. Load
B. Temperature stress
C. Shrinkage stress
D. All the above - For stairs spanning horizontally, the minimum waist provided is________________?
A. 4 cm
B. 6 cm
C. 8 cm
D. 12 cm - The shear reinforcement in R.C.C. is provided to resist__________________?
A. Vertical shear
B. Horizontal shear
C. Diagonal compression
D. Diagonal tension
