A. Within the flange
B. At the bottom edge of the slab
C. Below the slab
D. All the above
Related Mcqs:
- A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is____________________?
A. bn (fc/2) (d – n/3)
B. Atft (d – n/3)
C. ½ n1 (1 – n1/3) cbd²
D. All the above - effective depth and depth of the neutral axis respectively of a singly reinforced If d and n are the beam, the lever arm of the beam, is_________________?
A. d
B. n
C. d + n/3
D. d – n/3 - If the modular ratio is , steel ratio is and overall depth of a beam is , the depth of the critical neutral axis of the beam, is___________________?
A. [m/(m – r)] d
B. [m/(m + r)] d
C. [(m + r)/ m] d
D. [(r – m)/m] d - The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is_________________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - In a doubly-reinforced beam if and the effective depth and is depth of critical neutral axis, the following relationship holds good______________?
A. mc/t = n/(d – n)
B. (m + c)/t = n/(d + n)
C. (t + c)/n = (d + n)/n
D. mc/t = (d – n)/t - A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis______________?
A. Remains within the flange
B. Remains below the slab
C. Coincides the geometrical centre of the beam
D. None of these - If the depth of actual neutral axis of a doubly reinforced beam______________?
A. Is greater than the depth of critical neutral axis, the concrete attains its maximum stress earlier
B. Is less than the depth of critical neutral axis, the steel in the tensile zone attains its maximum stress earlier
C. Is equal to the depth of critical neutral axis; the concrete and steel attain their maximum stresses simultaneously
D. All the above - With usual notations the depth of the neutral axis of a balanced section, is given by______________?
A. mc/t = (d – n)/n
B. t/mc = (d – n)/n
C. t/mc = (d + n)/n
D. mc/t = n/ (d – n) - If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre -stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is_______________?
A. P/A
B. A/P
C. P/2A
D. 2A/P
