A. D = 0.0775 a
B. D = 0.775 a
C. D = 0.775 a
D. D = 0.775 a2
Related Mcqs:
- If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by________________?
A. D = 0.00775 aP
B. D = 0.0775 aP
C. D = 0.07775 aP
D. D = 0.775 Pa - The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - If q is the punching shear resistance per unit area a, is the side of a square footing for a column of side b, carrying a weight W including the weight of the footing, the depth D. of the footing from punching shear consideration, is____________________?
A. D = W (a – b)/4a²bq
B. D = W (a² – b²)/4a²bq
C. D = W (a² – b²)/8a²bq
D. D = W (a² – b²)/4abq
- If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where is the distance of centre of gravity of column loads______________?
A. y = L – (l – ) )
B. y = L/2 + (l –
C. y = L/2 – (l + )
D. y = L/2 – (l – ) - If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is______________?
A. 37 cm
B. 38 cm
C. 39 cm
D. 40 cm
- A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is_________________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2, the Safe load on the column, should not exceed_______________?
A. 4120 kg
B. 41,200 kg
C. 412,000 kg
D. None of these - The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt________________?
A. Is safe in shear
B. Is unsafe in shear
C. Is over safe in shear
D. Needs redesigning - Based on punching shear consideration, the overall depth of a combined footing under a column A, is_______________?
A. (Area of the column A × Safe punching stress)/Load on column A
B. (Perimeter of column A × Safe punching stress)/(Load on column A + Upward pressure × Area of the column)
C. (Perimeter of column A × Safe punching stress)/(Load on column A × Upward pressure × Area of the column)
D. None of these - In a combined footing if shear stress exceeds 5 kg/cm2, the nominal stirrups provided are______________?
A. 6 legged
B. 8 legged
C. 10 legged
D. 12 legged
