A. [( – )/2] h
B. [( + )/4] h
C. [( + )/2] h
D. ( – h
Related Mcqs:
- per unit run exerted by the Total pressure on the vertical face of a retaining wall of height retained earth weighing per unit volume, is___________________?
A. wh [(1 – )/(1 + sin )]
B. wh² [(1 – )/(1 + sin )]
C. wh² [(1 – )/2(1 + sin )]
D. wh² [(1 – )/3(1 + sin )] - If A is the area of the foundation of a retaining wall carrying a load W and retaining earth of weight w per unit volume, the minimum depth (h) of the foundation from the free surface of the earth, is )/(1 + sin )]_________________?
A. h = (W/Aw) [(1 –
B. h = (W/Aw) [(1 + )/(1 + sin )]
C. h = (W/Aw) [(1 – )/(1 + sin )]²
D. h W/Aw) [(1 – )/(1 + sin )]² - To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than________________?
A. b/3
B. b/4
C. b/5
D. b/6 - The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is_______________?
A. 51.5
B. 52.5
C. 53.5
D. 54.5 - Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of_____________________?
A. h /4
B. h/3
C. h/2
D. 2h/3 - For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is_______________?
A. wl²/4
B. wl²/8
C. wl²/12
D. wl²/16 - If is the overall height of a retaining wall retaining a surcharge, the width of the base slab usually provided, is________________?
A. 0.3 H
B. 0.4 H
C. 0.5 H
D. 0.7 H - A retaining wall and is the horizontal earth pressure, the factor of safety If is weight of against sliding, is_____________?
A. 1.0
B. 1.25
C. 1.5
D. 2.0 - In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed________________?
A. 10 mm
B. 15 mm
C. 20 mm
D. 25 mm - An R.C.C. lintel is spanning an opening of 2 m span in a brick wall. The height of the roof is 2.9 m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be designed for self weight plus_______________?
A. Triangular load of the wall
B. UDL of wall
C. UDL of wall + load from the roof
D. Triangular load + load from the roof
1 Comment
dear admin please rectify the answers of this MCQ as i have already found many mistake and missing numbers as well as answer in RCC portion specially which is manifesting bad image of this website to the learners.it is requested you that If anyone intends to submit a mcq please make sure that the question and answer of it is accurate as well as not containing missing data before approving it otherwise it will mislead many.
Thank you.