A. Fixed end
B. Free end
C. Mid span
D. Mid span and fixed support
Related Mcqs:
- Design of R.C.C. simply supported beams carrying U.D.L. is based on the resultant B.M. at________________?
A. Supports
B. Mid span
C. Every section
D. Quarter span - If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is________________?
A. 200 cm
B. 300 cm
C. 150 cm
D. 100 cm - The floor slab of a building is supported on reinforced cement floor beams. The ratio of the end and intermediate spans is kept______________?
A. 0.7
B. 0.8
C. 0.9
D. 0.6 - If R and T are rise and tread of a stair spanning horizontally, the steps are supported by a wall on one side and by a stringer beam on the other side, the steps are designed as beams of width_______________?
A. R + T
B. T – R
C. 2 + T2)
D. R – T - For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is____________________?
A. 0.6
B. 0.7
C. 0.8
D. 0.9 - An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is__________________?
A. 300 cm
B. 233 cm
C. 176 cm
D. 236 cm - The maximum area of tension reinforcement in beams shall not exceed_______________?
A. 0.15 %
B. 1.5 %
C. 4 %
D. 1 % - In a cantilever retaining wall without a heel slab______________?
A. Thickness of the stem is kept same throughout
B. Base slab is made 10 cm thicker than the stem
C. Width of the base slab is kept 0.7 time the total height of the wall
D. All the above - Cantilever retaining walls can safely be used for a height not more than_______________?
A. 3 m
B. 4 m
C. 5 m
D. 6 m - The maximum ratio of span to depth of a cantilever slab, is_______________?
A. 8
B. 10
C. 12
D. 16
