A. in the middle of the track a little in front of the toes of the tongue rail
B. near and parallel to inner side of one of the rails
C. at right angle to the rail
D. near and parallel to inner side of both the rails
Related Mcqs:
- A treadle bar is used for_____________________?
A. interlocking points and signal
B. setting points and crossings
C. setting marshalling yard signals
D. track maintenance - Stretcher bar is provided________________?
A. to permit lateral movement of the tongue rail
B. to maintain the two tongue rails at the exact distance
C. to ensure exact gauge at the toe of the switch as well as the nose of crossing
D. to prevent any vertical movement between the wing rail and nose of crossing - Number offish bolts per fish plate is________________?
A. 2
B. 4
C. 5
D. 6 - The maximum degree of curvature for Meter Gauge is limited to_________________?
A. 10°
B. 16°
C. 30°
D. 40° - The limiting value of cant excess for Broad Gauge is________________?
A. 55 mm
B. 65 mm
C. 75 mm
D. l00 mm - For laying the railway track, materials required are__________________?
A. Rails
B. FishPlates
C. Fish Bolts
D. Bearing Plates
The quantities required for one kilometer of Broad Gauge track will be - For the purpose of track maintenance, the number of turn out equivalent to one track km are__________________?
A. 1
B. 2
C. 5
D. 10 - Number of keys used in CST-9 sleeper is_________________?
A. 2
B. 3
C. 4
D. none of the above - The width of foot for 90 R rail section is__________________?
A. 100 mm
B. 122.2 mm
C. 136.5 mm
D. 146.0 mm - In a B.G. railway track, the specified ruling gradent is 1 in 250. The horizontal curve of 3° on a gradient of 1 in 250 will have the permissible gradient of__________________?
A. 1 in 257
B. 1 in 357
C. 1 in 457
D. 1 in 512
