A. center to center of rails
B. running faces of rails
C. outer faces of rails
D. none of the above
Related Mcqs:
- The standard length of rail for Broad Gauge and Meter Gauge are respectively __________________?
A. 12 m and 12 m
B. 12 m and 13 m
C. 13 m and 12 m
D. 13 m and 13 m - To ensure exact gauge, the gauge tie plates are provided at_________________?
A. toe of the switch
B. nose of crossing
C. both (A) and (B)
D. none of the above - The total gap on both sides between the inside edges of wheel flanges and gauge faces of the rail is kept as_________________?
A. 10mm
B. 13mm
C. 16mm
D. 19 mm - Minimum depth of ballast cushion for a Broad Gauge wooden sleeper of size 275x25x13 cm with 75cm sleeper spacing is________________?
A. 15 cm
B. 20 cm
C. 25 cm
D. 30cm - For a Broad Gauge route with M+7 sleeper density, number of sleepers per rail length is________________?
A. 18
B. 19
C. 20
D. 21 - The compensation for curvature on gradient for Meter Gauge is given by________________?
A. 70/R
B. 52.5/R
C. 35/R
D. 105/R
where R is radius of curve - A Broad Gauge branch line takes off as a contrary flexure from a main line If the superelevation required for branch line is 10 mm and cant deficiency is 75 mm, the superelevation to be actually provided on the branch line will be__________________?
A. 10 mm
B. 64 mm
C. 85 mm
D. 65 mm - The steepest gradient permissible on a 2.5° curve for Broad Gauge line having ruling gradient of 1 in 200 is___________________?
A. 1 in 250
B. 1 in 222
C. 1 in 235
D. 1 in 275 - The desirable rate of change of cant deficiency in case of Metre Gauge is_______________?
A. 20 mm/sec
B. 35 mm/sec
C. 55 mm/sec
D. 65 mm/sec - The formation width for a double line Broad Gauge track in cutting (excluding drains) as adopted on Indian Railways is___________________?
A. 6.10 m
B. 8.84 m
C. 10.21m
D. 10.82 m
