A. equal radii and equal widths of pavement
B. equal radii but pavement width is more at entrance than at exit curve
C. equal pavement widths but radius is more at entrance curve than at exit curve
D. different radii and different widths of pavement
Related Mcqs:
- To calculate the minimum value of ruling radius of horizontal curves in plains, the design speed is given by_________________?
A. 8 kmph
B. 12kmph
C. 16kmph
D. 20 kmph - In case of summit curves, the deviation angle will be maximum when_______________?
A. an ascending gradient meets with another ascending gradient
B. an ascending gradient meets with a descending gradient
C. a descending gradient meets with another descending gradient
D. an ascending gradient meets with a level surface - In highway construction on super elevated curves, the rolling shall proceed from_________________?
A. sides towards the centre
B. centre towards the sides
C. lower edge towards the upper edge
D. upper edge towards the lower edge - The maximum number of vehicles beyond which the rotary may not function efficiently is______________?
A. 500 vehicles per hour
B. 500 vehicles per day
C. 5000 vehicles per hour
D. 5000 vehicles per day - A traffic rotary is justified where______________?
A. number of intersecting roads is between 4 and 7
B. space is limited and costly
C. when traffic volume is less than 500 vehicles per hour
D. when traffic volume is more than 5000 vehicles per hour - When a number of roads are meeting at a point and only one of the roads is important, then the suitable shape of rotary is________________?
A. circular
B. tangent
C. elliptical
D. turbine - When the path travelled along the road surface is more than the circumferential movement of the wheels due to rotation, then it results in______________?
A. slipping
B. skidding
C. turning
D. revolving - If an ascending gradient of 1 in 50 meets a descending gradient of 1 in 50, the length of summit curve for a stopping sight distance of 80 m will be_______________?
A. zero
B. 64m
C. 80m
D. 60m - The provision of traffic signals at intersections______________?
A. reduces right angled and rear end collisions
B. increases right angled and rear end collisions
C. reduces right angled collisions but may increase rear end collisions
D. reduces rear end collisions but may increase right angled collisions - The number of repetitions, which the pavement thickness designed for a given wheel load should be able to support during the life of pavement is______________?
A. 1000
B. 10000
C. 100000
D. 1000000
