Camber in the road is provided for_______________?

Related Mcqs:

1. The camber of road should be approximately equal to___________________?

   A. longitudinal gradient B. two times the longitudinal gradient C. three times the longitudinal gradient D. half the longitudinal gradient...

2. When the bituminous surfacing is done on already existing black top road or over existing cement concrete road, the type of treatment to be given is________________?

   A. seal coat B. tack coat C. prime coat D. spray of emulsion...

3. The shape of the camber, best suited for cement concrete pavements, is_______________?

   A. straight line B. parabolic C. elliptical D. combination of straight and parabolic...

4. For water bound macadam roads in localities of heavy rainfall, the recommended value of camber is_______________?

   A. 1 in 30 B. 1 in 36 C. 1 in 48 D. 1 in 60...

5. The camber of shoulders in water bound macadam roads is________________?

   A. equal to the cross slope of pavement B. less than the cross slope of pavement C. greater than the cross slope of pavement D. zero...

6. The camber for hill roads in case of bituminous surfacing is adopted as________________?

   A. 2% B. 2.5% C. 3% D. 4%...

7. The shoulder provided along the road edge should be_______________?

   A. rougher than the traffic lanes B. smoother than the traffic lanes C. of same colour as that of the pavement D. of very low load bearing capacity...

8. Nagpur road plan formula were prepared by assuming______________?

   A. rectangular or block road pattern B. radial or star and block road pattern C. radial or star and circular road pattern D. radial or star and grid road pattern...

9. On a right angled road intersection with two way traffic, the total number of conflict points is______________?

   A. 6 B. 11 C. 18 D. 24...

10. The maximum limit of water absorption for aggregate suitable for road construction is____________?

    A. 0.4 % B. 0.6% C. 0.8 % D. 1.0 %...