A. 16 m
B. 20 m
C. 24 m
D. 30 m
Related Mcqs:
- The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is____________________?
A. 30 minutes
B. 1 hour
C. 1 hour and 30 minutes
D. 2 hours - The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is_____________________?
A. 204 cu.m
B. 208 cu.m
C. 212 cu.m
D. 216 cu.m - The recommended detention period for grit chambers is_______________?
A. 1 minute
B. 2 minutes
C. 3 minutes
D. 5 minutes - A model of torpedo is tested in a towing tank at a velocity of 25 m/sec. The prototype is expected to attain a velocity of 5 m/sec. What model scale has been used ?
A. 1 : 5
B. 1 : 2.5
C. 1 :25
D. 1:V5″
E. 1 : 53/2 - The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is____________________?
A. 100 cm
B. 110 cm
C. 120 cm
D. 150 cm - If the grit in grit chambers is 4.5 million litres per day, its cleaning is done____________________?
A. Manually
B. Mechanically
C. Hydraulically
D. Electrically - The grit and silt of the grit chambers, may not be used for_________________?
A. Raising low lying areas by dumping
B. Concreting
C. Both A. and B.
D. Neither A. nor B - The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is __________________?
A. 5 m
B. 5.5 m
C. 6.5 m
D. 7 m - In a grit chamber of a sewage treatment plant ____________________?
A. Flow velocity 0.15 m to 0.3 m/sec is kept
B. Depth of 0.9 m to 1.20 m is kept
C. One minute of detention period is kept
D. All the above - If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by_________________?
A. Chezy
B. Manning
C. Bazin
D. Kutter
Advertisement