Related Mcqs:

1. If the dynamic viscosity of a fluid is 0.5 poise and specific gravity is 0.5, then the kinematic viscosity of that fluid in stokes is__________________?

   A. 0.25
   B. 0.50
   C. 1.0
   D. none of the above

2. The boundary layer thickness in turbulent flow varies as______________?

   A. x”7
   B. x,/2
   C. x4/5
   D. x3/5

   where x is the distance from leading edge

3. The distance y from pipe boundary, at which the point velocity is equal to average velocity for turbulent flow, is________________?

   A. 0.223 R
   B. 0.423 R
   C. 0.577 R
   D. 0.707 R

   where R is radius of pipe

4. With the same cross-sectional area and immersed in same turbulent flow, the largest total drag will be on__________________?

   A. a circular disc of plate held normal to flow
   B. a sphere
   C. a cylinder
   D. a streamlined body

5. For hydro-dynamically smooth boundary, the friction coefficient for turbulent flow is_______________?

   A. constant
   B. dependent only on Reynolds number
   C. a function of Reynolds number and relative roughness
   D. dependent on relative roughness only

6. A fluid of kinematic viscosity 0.4 cm2/sec flows through a 8 cm diameter pipe. The maximum velocity for laminar flow will be__________________?

   A. less than 1 m/sec
   B. 1 m/sec
   C. 1.5 m/sec
   D. 2 m/sec

7. The discharge of a liquid of kinematic viscosity 4 cm2/sec through a 8 cm dia-meter pipe is 3200n cm7sec. The type of flow expected is__________________?

   A. laminar flow
   B. transition flow
   C. turbulent flow
   D. not predictable from the given data

8. The distance from pipe boundary, at which the turbulent shear stress is one-third die wall shear stress, is_______________?

   A. 1/3 R
   B. 1/2 R
   C. 2/3 R
   D. 3/4R

   where R is the radius of pipe

9. The depth ‘d’ below the free surface at which the point velocity is equal to the average velocity of flow for a uniform laminar flow with a free surface, will be_________________?

   A. 0.423 D
   B. 0.577 D
   C. 0.223 D
   D. 0.707 D

   where D is the depth of flow

10. The unit of kinematic viscosity is_______________?

    A. gm/cm-sec2
    B. dyne-sec/cm2
    C. gm/cm2-sec
    D. cm2/sec