A. not needed
B. provided equally on inner and front faces
C. provided more on inner face than on front face
D. provided more on front face than on inner face
Related Mcqs:
- The main reinforcement in the heel of a T-shaped R.C. retaining wall is provided on______________?
A. top face perpendicular to wall
B. bottom face perpendicular to wall
C. both top and bottom faces perpendicular to wall
D. none of the above - The main reinforcement in the toe of a T- shaped R C. retaining wall is provided on_______________?
1. top face parallel to the wall
2. top face perpendicular to the wall
3. bottom face paralleUo the wall
4. bottom face perpendicular to the wall
The correct answer is ?A. only (2) is correct
B. (1) and (2)are correct
C. (3) and (4) are correct
D. only (4) is correct - In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on______________?
A. the front face in one direction
B. the front face in both directions
C. the inner face in one direction
D. the inner face in both directions - A T-shaped retaining wall mainly conssits of_________________?
A. one cantilever
B. two cantilevers
C. three cantilevers
D. four cantilevers - In a counterfort retaining wall, the main reinforcement in the stem at mid span is provided on_______________?
A. front face only
B. inner face only
C. both front face and inner face
D. none of the above - In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on_______________?
1. bottom face near counterfort
2. top face near counterfort
3. bottom face near centre of span
4. top face near centre of span The correct answer is
A. only (1)
B. only (2)
C. both (1) and (4)
D. both (2)and (3) - In a counterfort retaining wall, the main reinforcement is provided on the_______________?
1. bottom face in front counterfort
2. inclined face in front counterfort
3. bottom face in back counterfort
4. inclined face in back counterEort
The correct answer isA. (1) and (ii),
B. (2) and (3)
C. (1) and (4)
D. (3) and (4) - For a continuous slab of 3 m x 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is__________________?
A. 50 mm
B. 75 mm
C. 100 mm
D. 120 mm - In counterfort retaining walls, the main reinforcement in the stem at support is_______________?
A. not provided
B. provided only on inner face
C. provided only on front face
D. provided both on inner and front faces - Half of the main steel in a simply supported slab is bent up near the support at a distance of x from the center of slab bearing where x is equal to________________?
A. 1/3
B. 1/5
C. 1/7
D. 1/10
where 1 is the span