A. 15 mm
B. 20 mm
C. 25 mm
D. 50mm
Related Mcqs:
- The minimum cover in a slab should neither be less than the diameter of bar nor less than_______________?
A. 10 mm
B. 15 mm
C. 25 mm
D. 13 mm - For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than_______________?
A. 15 mm
B. 25 mm
C. 30 mm
D. 40 mm - The percentage of reinforcement in case of slabs, when high strength deformed bars are used is not less than________________?
A. 0.15
B. 0.12
C. 0.30
D. 1.00 - According to IS : 456-1978, the cblumn or the strut is the member whose effective length is greater than________________?
A. the least lateral dimension
B. 2 times the least lateral dimension
C. 3 times the least lateral dimension
D. 4 times the least lateral dimension - The diameter of ties in a column should be_______________?
A. more than or equal to one fourth of diameter of main bar
B. more than or equal to 5 mm
C. more than 5 mm but less than one-fourth of diameter of main bar
D. more than 5 mm and also more than one-fourth of diameter of main bar - In reinforced concrete footing on soil, the minimum thickness at edge should not be less than______________?
A. 100 mm
B. 150 mm
C. 200 mm
D. 250 mm - For a continuous slab of 3 m x 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is__________________?
A. 50 mm
B. 75 mm
C. 100 mm
D. 120 mm - Minimum pitch of transverse reinforcement in a column is________________?
A. the least lateral dimension of the member
B. sixteen times the smallest diameter of longitudinal reinforcement bar to be tied
C. forty-eight times the diameter of transverse reinforcement
D. lesser of the above three values - For the design of retaining walls, the minimum factor of safety against overturning is taken as_____________?
A. 1.5
B. 2.0
C. 2.5
D. 3.0 - The minimum diameter of longitudinal bars in a column is________________?
A. 6 mm
B. 8 mm
C. 12 mm
D. 16 mm
